Tag: dairy free cake

Sprinkle Celebration Cake


This fun celebration cake is adapted from my Victoria sponge recipe with the addition of festive sprinkles throughout the cake.

As with any Victoria sponge recipe, the proportions of ingredients are based on the weight of the eggs (without their shells), so you can use whichever size eggs you prefer.

Makes one 4-layer 6” (15cm) cake. All ingredients, except the double cream, should be room temperature

Ingredients

Cake – single layer so you need 4x for the full cake

  • 2 eggs
  • 2 eggs weight of golden caster sugar
  • 2 eggs weight of margarine, plus extra for greasing
  • 2 eggs weight of self raising flour
  • 20g bake stable sprinkles (I use these sprinkles)
  • 1 tsp vanilla extract
  • 1 tbsp Elmlea plant based double cream

Buttercream (x2 – one portion for filling and crumb coat, then same again for the final decoration)

  • 80g margarine
  • 80g solid cooking oil (I use Trex, but other solid oil can be used)
  • 330g icing sugar
  • 2 tsp vanilla extract
  • 1 tsp lemon juice

Assembly/Decorating Stuffs

  • Sprinkles
  • Strawberry jam

Cake Process

  1. Preheat the oven at 170C fan assisted and prepare a 6″ (15cm) sandwich tin with margarine, baking paper on the bottom, and dust with flour
  2. Beat the sugar and margarine together at a medium speed until light and fluffy
  3. Using a spatula, scrape down any mixture from the sides of the bowl. Beat in the eggs individually at medium speed. Add the vanilla extract
  4. Scrape down any mixture from the sides again. Sieve the flour into the mixture, add the bake stable sprinkles, and fold in
    • If the batter is feeling a bit thick add the double cream
  5. Pour into the prepared tin and put in the oven for 30-35 minutes, or until a skewer comes out clean and the top of the cake is springy. Put on a cooling rack in the tin for 30 minutes, then take out of the tin and continue to cool on the rack
  6. Repeat steps 2-5 until all four cakes are baked and cooled. Once cooled, level each cake

Now to make the buttercream for the crumb coat! Just follow the process for my Vanilla Buttercream Icing.

And now we decorate.

  1. Grab your cake drum/board and put a small dollop in the centre. Place your first cake layer centre on the board
  2. Cover the top of the layer with a thick layer of buttercream and smooth it out with an offset spatula. Make a small well in the middle and scoop in 1-2 tsp of the jam. Place the next cake layer on top and repeat until the last cake layer is on
    • I found that I had to put some bamboo dowels in to keep the cake from slipping with all the weight of the four layers
  3. Cover the top and sides with buttercream and smooth with a side scraper
  4. Pop in the fridge for at least 2 hours, better if overnight, until the buttercream has hardened
  5. Make some more buttercream using the same amount of ingredients and with the same process
  6. Cover the top and sides again with this extra buttercream and make sure it’s nice and thick. Smooth with a side scraper
  7. Pop in the fridge again until this layer of buttercream has hardened
  8. Push your sprinkles of choice into the buttercream. I found it easier to wear a vinyl food safe glove while doing this

Ta da! Enjoy!

Bee Hive Cake

I decorated this 3 layer lemon and honey cake (recipe here) with lemon Swiss meringue buttercream (recipe here) and fondant bees.

I started by covering the cake drum in green fondant. I lightly wet the drum using a pastry brush dipped in water, then draped the green fondant (which had been rolled out to around 2mm) over the top. I smoothed the fondant with a smoothing tool. Using a sharp knife, I trimmed the edges of the fondant so that it was in line with the edge of the cake drum. I then stuck the green ribbon around the edge using double sided tape. For a bit of extra fun, I stuck little bees around the edge.

Next I made the bees. I rolled small amounts of yellow fondant into cylinders. Then I rolled out black fondant to about 1mm thick and cut out strips. I used a small amount of water to stick the strips to the yellow fondant; a fine paintbrush is the easiest way to apply the water. I used a cocktail stick dipped in black food colouring to make the eyes, and an icing tool shaped as a D dipped in black food colouring to make the smile. I pushed in almond flakes for the wings, then pushed cocktail sticks in so it looks like the bees are flying.

Finally, I made the little hive door with black fondant by cutting an arch out of paper then using that as a stencil.

I completed the fondant parts in advance so that the fondant dried and hardened in time.

I made the lemon and honey cake recipe twice. The second batch I made as a 2 egg version and poured it into a 6″ (15cm) heatproof bowl which I had greased with margarine. I popped this in the oven for 20 minutes at 155C, then dropped it down to 140C and checked every 5 minutes until the top sprung back when touched.

I made a full batch of Swiss meringue buttercream, adding 3 tsp of lemon extract to get the lemon flavour I wanted.

Then I started assembling the cake. I cut the tops off the round layers to make them flat. I used a 6″ (15cm) cake board and put a blob of buttercream in the centre to keep the cake in place. Then I put the first layer on and covered the top in buttercream. I repeated this with all three layers, then gave the cake a crumb coat.

I popped this in the fridge for a few hours so that the buttercream firmed up. While the cake was firming up, I added yellow colouring to the remaining buttercream to give it a golden colour.

Once the cake had finished firming up in the fridge, I started getting things ready for decorating. I put a large round piping tip into a piping bag and transferred the golden lemon buttercream into it. Starting from the bottom, I piped rings around the cake. I used a smaller piping tip to fill in any holes I saw. Once finished, I popped the cake back in the fridge.

Once the buttercream had firmed up, I moved the cake carefully onto the covered cake drum. I then placed the little door and put the bees in position.

Enjoy!

Lemon and Honey Cake

Using honey instead of sugar makes this cake quite rich and moist, and the classic pairing of honey and lemon will have your tastebuds buzzing.

This recipe makes two 6″ (15cm) cake layers.

Ingredients

  • 150g honey
  • 175g margarine, plus extra for greasing
  • 3 large eggs
  • 175g self raising flour
  • 1/2 tsp bicarbonate of soda
  • Zest of 1 lemon
  • 1 tsp lemon juice
  • 1 tsp plant based milk

Process

  1. Preheat the oven to 155°C fan assisted and put a shelf in the middle. Grease and line the bottom of two 6″ (15cm) cake tins to ensure your cake doesn’t stick
    • Lightly grease the inside with margarine. Cut a circle of non-stick baking parchment the size of the tin and use it to line the bottom – the margarine on the bottom of the tin will keep the parchment in place. Dust the side with some flour, making sure to knock off the excess
  2. Put the honey and margarine in a bowl together and beat them until light and creamy (at a medium speed if using a stand mixer)
  3. Add the eggs one at a time, making sure they are fully incorporated before adding the next one
  4. Add the lemon zest and juice, and mix until combined
  5. Sift in the flour and bicarbonate of soda, and fold until combined. If the mixture feels stiff, add the plant based milk to slacken it slightly
    • This is still a very thick mixture that shouldn’t be runny, but you should also be able to stir it without difficulty
  6. Pour the mixture evenly between the two prepared cake tins and level off with an offset spatula or butter knife
    • I tend to weigh the tins to make sure the quantities are even
  7. Bake for 25 minutes, at which point the tops should spring back to the touch. You can’t trust a skewer with this cake, and this recipe gets dark really quickly because of the honey
  8. Allow the cakes to cool for 15-20 minutes in the tin before removing onto a wire rack. Allow the cakes to cool completely on the wire rack before storing or decorating

I coated this cake with just a crumb coat of lemon buttercream (recipe here, I swapped out the vanilla extract for lemon extract), but you can decorate it how you wish.

Enjoy!

As you can see, the cake gets really dark once baked

Amazon Associate Links

Most of the baking equipment I used can be found on Amazon, find them here

Victoria Sponge

I love a good Victoria sponge, they always make me think of warm weather and sunshine. The addition of fresh summer fruits can elevate a regular Victoria sponge to something more delectable and decadent.

Victoria sponge recipes are based on the weight of the eggs, so egg size doesn’t matter and you can use whatever you have to hand. Weigh these without shells first so that the weight of the other ingredients is correct.

This recipe will make a single 8″ (20cm) sponge layer. You will need to bake two to make the fully assembled cake. All ingredients, except the double cream and fresh fruit, should be room temperature.

Ingredients

Cake – single layer

  • 2 eggs
  • 2 eggs weight of margarine, plus extra for greasing
  • 2 eggs weight of caster sugar
  • 2 eggs weight of self raising flour
  • 1 tsp vanilla extract – NOT vanilla essence
  • 1 tsp orange extract
  • 1 tsp orange liqueur, like Cointreau (optional, for adults)
  • 1 tbsp plant based double cream (I use Elmlea plant based double cream, available at most UK supermarkets)

Cream Filling

  • 150ml plant based double cream
  • 1 tbsp orange liqueur, like Cointreau (optional, for adults)
  • 1 tsp orange extract

Assembly

  • Good quality berry jam
  • 250g fresh summer berries (strawberries, raspberries, etc)
  • 2 tbsp icing sugar, to dust

Process

Cake

  1. Prepare an 8″ (20cm) cake tin (I prefer to use a springform tin) to ensure your cake doesn’t stick
    • Lightly grease the inside with margarine. Cut a circle of non-stick baking parchment the size of the tin and use it to line the bottom – the margarine on the bottom of the tin will keep the parchment in place. Dust the sides with some flour, making sure to knock off the excess
  2. Set oven to 170C fan assisted and put a shelf in the bottom middle
  3. Put margarine and caster sugar into a bowl and beat them until light and creamy (at a medium speed if using an electric mixer)
  4. Add eggs slowly, making sure to keep the speed the same. Add a tablespoon of the flour once the eggs are added to stop the mixture from curdling
  5. Add vanilla and orange extract, and orange liqueur if using, and mix until combined
  6. Sift in flour and fold mixture together until combined. If the mixture feels stiff, add the cream and continue to fold until combined
  7. Pour mixture into prepared tin and level off with offset spatula or butter knife
  8. Bake for 20 minutes, or until a skewer comes out clean
  9. Allow cake to cool for 15-20 minutes in the tin before removing onto wire rack. For a Victoria sponge, I like to cool the cakes upside-down on the wire rack so that the sponges are flat. Be careful when doing this as the tin will still be slightly warm. Allow the sponge to cool completely on the wire rack
  10. Repeat process for second layer

Cream Filling

  1. Whip the cream with the orange extract, and orange liqueur if using, at a high speed until thick

Assembly

  1. Place bottom sponge on cake board or stand. Cover with a thick layer of jam
  2. Spread summer berries around on the jam. I cut strawberries in half so that they aren’t so bulky
  3. Cover the berries with the whipped cream using an offset spatula, spoon, or by piping it on
  4. Top with other sponge
  5. Dust with icing sugar

Enjoy!

Amazon Associate Links

Most of the baking equipment I used can be found on Amazon, find them here